Cable Management Systems

Unitech Cable trays and accessories from SFSP have been manufactured in compliance with BS 5750/BSEN 10130/BSEN 10131/ BSEN 10051 and NEMA standards. A wide, precise range of products capable of providing the characteristics which respond to the proposed application, along with quality of assembly, speed of installation, and cost savings cable trays.

                                             

TYPES OF SIDE HEIGHTS

Straight                      (STR)

Return Flange Inside     (RFI)

Return Flange Outside   (RFO)

C-Type Inside              (CTI)

C-Type Outside          (CTO)

Technical Information

Side Heights Dimensions	13, 25, 50, 75 & 100 mm
Width Range	50 up to 1000 mm

Types of Perforation Staggered

 serial

Material Thickness 1.0, 1.25, 1.50 & 2.0 mm

Shape of Accessories Cornered Curved 

Available Finishes 

Stainless Steel (SS) Pre-Galvanized Steel (PG) Hot dip Galvanized Steel (HG) Electrolytic Galvanized Steel (EG) Powder Coating (PC) 

Cable Tray Runs HCT - Cable Trays Thickness of sheet 1.5 mm Stock length: 3000 mm / 2440 mm LCT - Cable Trays Thickness of sheet 1.0 mm Stock length: 3000 mm / 2440 mm MCT - Cable Trays Thickness of sheet 1.25 mm Stock length: 3000 mm / 2440 mm VCT - Cable Trays Thickness of sheet 2.0 mm Stock length: 3000 mm / 2440 mm

Cable Ladder Systems

Cable Ladder of Unitech is an economical wire management system designed to support and protect electrical wires and cables. Cable Ladder is permitted in a variety of indoor and outdoor applications. Cable ladder systems can provide significant advantages in cable fill over other wiring methods. This can provide savings in the size or number of raceways required thereby reducing both material and labor costs. Cable Ladders are available in a variety of finishes, and in varying width and load depth for many applications including primary service entrance, main power feeders, branch wiring, instrument and communications cable.

Rung Type and Dimensions Rung Thicknesses: 1.5mm - 2.0 mm Dimensions: W = 41 mm H  = 21 mm

Cable Trunking Systems

SFSP manufactures a full range of Unitech Cable Trunkings: Single and multi compartments with accessories according to the highest standards of fabrication. All these products are available with  various finishes applied in our factories to your demands. Unitech Trunkings are available within variable thicknesses from 0.9 mm to 2 mm according to the specific project’s specifications and as per customers’ requests. Several types of trunkings and fittings with accessories are presented in our catalogue. For additional information on installation, system design or fitting not shown in this publication, SFSP’s technical personnel are available to provide all assistance possible.

Materials  Pre Galvanized : GI  Hot-dip Galvanized : HD  Black Steel : BL  Powder Coated : PC   Stainless Steel : SS Compartments  Single Compartment : S  Double Compartment : D  Triple Compartment : T Thickness  Sheet of 0.9 mm : 2  Sheet of 1.2 mm : 3  Sheet of 1.5 mm : 4  Sheet of 2.0 mm : 5

Cable Support Systems

Beams

U- Support Hole distance 75mm U - Support Thickness: 5.0 mm length: 200-200mm

C - Channel 41 x 21 mm or B2B 41 x 41 mm or B2B Thickness: 1.5, 2.0 & 2.5 mm Length: 3 m

Wall Bracket Thickness: 5.0 mm